
Structural Engineers Poole
Removing a wall, extending, or worried about cracks in a Poole property? We've got you covered.
What We Help With
In Poole, the question is often not simply whether a wall can come out. We need to see how the change sits within a converted flat, a harbour-side property or a later extension added to the original house.
We can help with a single opening, a larger alteration or a report on cracking, but we first match the scope to the building and the work you actually plan to do.
- Wall removals in houses and converted flats
- Extensions, loft conversions and larger rear openings
- Cracking, movement and pre-purchase structural reports
Load-bearing wall removalExtension and loft conversion designStructural calculationsStructural surveys
What We Need From You
Start with the property address, photographs and anything that shows the existing layout. For a harbour-side project, include proposed excavation, retaining work or a basement plan; those details change what we need to check.
If the work is in a flat, send the freeholder or managing agent requirements before we price the design.
- Photos of the room, wall or defect from close up and further back
- Existing and proposed drawings, even if they are only sketch plans
- Details of nearby building work, drainage changes or previous alterations

Site Visits
We can often assess a straightforward alteration from clear information. We recommend a Poole visit where the property is a conversion, the existing support is hidden, or a project near the harbour includes significant digging, retaining walls or a new foundation.
A visit lets us measure the building we are designing for instead of relying on assumptions from an estate-agent plan or an old drawing.
- Converted villas in Lower Parkstone and Penn Hill
- Projects near Sandbanks, Lilliput or the harbour edge
- Visible movement, uneven floors or a complicated sequence of past alterations
What You Receive
For an alteration, we provide the calculations, beam or foundation details and drawings your builder needs to set out the work. For a defect, we provide a report that explains what we saw, what may be causing it and the next sensible action.
The pack is specific to the property and the agreed work; it is not a generic steel-beam sheet.
- Clear structural drawings and calculation notes
- Bearing, connection and foundation information where required
- A report or monitoring recommendation when movement is the concern

Building Control Approval in Poole
Poole projects sit within the BCP Building Control area. When the work changes structure, we prepare the engineering information that supports the Building Control application and answer technical queries about our design.
Planning and Building Control are separate checks. A rear extension or new accommodation can bring planning issues as well, so confirm that route before work starts.
Our Process
-
1
Project steps
Send the address, photographs and the change you want to make.
-
2
Project steps
We confirm whether photos are enough or a visit is needed.
-
3
Project steps
We design or inspect the actual structure.
-
4
Project steps
You receive a clear pack for the builder, manager or Building Control officer.
Building Near Poole Harbour
Ground close to the harbour behaves differently from the rest of the town.
- Water tables sit higher, and ground tends to be softer and wetter
- For any excavation, basement, or deep foundation near the water, we start with a proper site investigation
- This matters most around Lilliput, Sandbanks and the harbourside stretches, where basements and retaining walls come up often
Converted Flats in Lower Parkstone
A lot of Poole's older streets have been converted into flats over the decades, and that history matters when you're altering one.
- Removing a wall can affect the flats above and below, not just your own space
- Freeholders and managing agents usually want to see structural calculations before granting permission to alter
- We look at what a past conversion actually did to the building, not just what you're planning to do next
Structural Engineering in Poole
We support homeowners, landlords and businesses across Poole. Send the property address, photographs and any plans you have so we can confirm the right engineering scope.
For an accurate quote: send the property address, plans where available, clear photographs and a short explanation of what you want to alter or have inspected.
